Search By Year, Make and Model
8x170 Hubcentric
2) 8x170 Hub and Wheel Centric Wheel Spacers For 2003 & Newer Ford F-250 F-350 Superduty Excursion Trucks 14x1.5 Studs Hubcentric 125mm Center Bore With Lip
$139.95 $178.95
|
Specs: Pieces Included: 2 Wheel Spacers Lug Nuts: 16 Open End Lug Nuts Included (Used for installation) Vehicle Bolt Pattern: 8x170 Stud Thread Pitch: 14x1.5 Hub and Wheel Center Bore: 125 OEM bore with lip for snug fit!
Features:
*If your stock vehicles hub studs protrude past the thickness of the spacer and prevent your wheels / rims from sitting flush against the surface face of the spacers, then it is required to shorten (trim) your OEM studs. This is a common practice and most shops can do this with ease. To be sure please measure the length of your stock studs prior to purchase. This piece is meant for the front hubs of the truck only. If you intend to use them on the rear hub you will need modification to the rear hub and/or spacer for it to work. We will not accept returns if they do not work as they must be modified for the rear hubs.*
All of our Wheel Spacers and Adapters are made from the highest quality Aerospace grade 6061 – T6 aluminum. Whether you’re looking to eliminate rubbing, increase turning radius, add spacing for brake clearance, change bolt pattern to fit any wheels, or just want that flush and aggressive stance, our wheel spacers are what you are looking for! Unlike some of our competitors, we only use machined 60 degree taper bulge seat lug nuts for complete lug centric centering for your security. It is the responsibility of you, the customer, to make sure these will work prior to the purchase by making sure they are made for your vehicle. The compatibility chart is a guide to help figure out what fits, but all vehicles may not be there as there is new models being made daily! If you have any questions email us or give us a call, we are here to help you! |
4) 8x170 Hub Centric & Wheel Centric Wheel Spacers For 1999-2002 Ford F-250 F-350 Superduty & Excursion Trucks | 14x2.0 Studs | Hubcentric 124.9mm Center Bore With Wheel Centering Lip
$259.95 $399.95
OUR QUALITY IS SECOND TO NONE! WE USE THE STRONGEST POSSIBLE FORGED & HEAT TREATED MATERIALS! WE DON'T SKIMP ON ANYTHING! PLEASE DO NOT TRUST CHEAP CHINESE COMPANIES OFFERING YOU UNSAFE SPACERS! WE'VE BEEN IN BUSINESS FOR OVER 12 YEARS STRONG & WE ARE AMERICAS #1 MOST TRUSTED WHEEL ACCESSORY WHOLESALER & RETAILER!
Specs:
Pieces Included: 4 Wheel Spacers
Lug Nuts: 32 Open End Lug Nuts Included (Used for installation)
Vehicle Bolt Pattern: 8x170
Stud Thread Pitch: 14x2.0 OEM Thread studs (Grade 12.9 industry leading strength studs!) The strongest possible stud grade made! Others use grade 10.9, We don't skimp for your safety!
Hub & Wheel Centric Center Bore: 124.9 OEM Center bore with centering lip for snug & secure OEM fit with a zero vibration guarantee!
Features:
- 6061 T-6 Billet Aerospace Grade Forged Billet Aluminum
- Precision CNC Machined For Excellent Fit
- Grade 12.9 Through Hardened Steel Studs Which Is Almost 3 Grades Above The Requirement Set By The Department Of Transportation!
- Open End Lug Nuts Included (To Be Used For Installation Of Spacers To Hub)
- Available In 2 Inch, 2.5 Inch & 3 Inches Thick!
VEHICLE FITMENTS
1999-2002 FORD F-250 F-350 SUPERDUTY TRUCKS
1999-2002 FORD EXCURSION TRUCKS
**If your stock vehicles hub studs protrude past the thickness of the spacer and prevent your wheels / rims from sitting flush against the surface face of the spacers, then it is required to shorten (trim) your OEM studs. This is a common practice and most shops can do this with ease. To be sure please measure the length of your stock studs prior to purchase. This piece is meant for the front hubs of the truck only. If you intend to use them on the rear hub you will need modification to the rear hub and/or spacer for it to work. We will not accept returns if they do not work as they must be modified for the rear hubs.**
We have been in business for over 12 years! All of our Wheel Spacers and Adapters are made from the highest quality Aerospace grade 6061 – T6 FORGED aluminum. Whether you’re looking to eliminate rubbing, increase turning radius, add spacing for brake clearance, change bolt pattern to fit any wheels, or just want that flush and aggressive stance, our wheel spacers are what you are looking for! Unlike some of our competitors, we only use machined 60 degree taper bulge seat lug nuts for complete lug centric centering for your security. It is the responsibility of you, the customer, to make sure these will work prior to the purchase by making sure they are made for your vehicle. The compatibility chart is a guide to help figure out what fits, but all vehicles may not be there as there is new models being made daily! If you have any questions email us or give us a call, we are here to help you!
2) 8x170 Hub and Wheel Centric Wheel Spacers For 1999-2002 Ford F-250 F-350 Superduty Excursion Trucks 14x2.0 Studs Hubcentric 125mm Center Bore With Lip
$139.95 $199.95
|
Specs: Pieces Included: 2 Wheel Spacers Lug Nuts: 16 Open End Lug Nuts Included (Used for installation) Vehicle Bolt Pattern: 8x170 Stud Thread Pitch: 14x2.0 Hub & Wheel Centric Center Bore: 125 OEM bore with lip for snug fit!
Features:
*If your stock vehicles hub studs protrude past the thickness of the spacer and prevent your wheels / rims from sitting flush against the surface face of the spacers, then it is required to shorten (trim) your OEM studs. This is a common practice and most shops can do this with ease. To be sure please measure the length of your stock studs prior to purchase. This piece is meant for the front hubs of the truck only. If you intend to use them on the rear hub you will need modification to the rear hub and/or spacer for it to work. We will not accept returns if they do not work as they must be modified for the rear hubs.*
All of our Wheel Spacers and Adapters are made from the highest quality Aerospace grade 6061 – T6 aluminum. Whether you’re looking to eliminate rubbing, increase turning radius, add spacing for brake clearance, change bolt pattern to fit any wheels, or just want that flush and aggressive stance, our wheel spacers are what you are looking for! Unlike some of our competitors, we only use machined 60 degree taper bulge seat lug nuts for complete lug centric centering for your security. It is the responsibility of you, the customer, to make sure these will work prior to the purchase by making sure they are made for your vehicle. The compatibility chart is a guide to help figure out what fits, but all vehicles may not be there as there is new models being made daily! If you have any questions email us or give us a call, we are here to help you! |
4) 8x170 Hub and Wheel Centric Wheel Spacers For 2003 & Newer Ford F-250 F-350 Superduty Excursion Trucks 14x1.5 Studs Hubcentric 125mm Center Bore With Lip
$259.95 $399.95
|
Specs: Pieces Included: 4 Wheel Spacers Lug Nuts: 32 Open End Lug Nuts Included (Used for installation) Vehicle Bolt Pattern: 8x170 Stud Thread Pitch: 14x1.5 Hub and Wheel Center Bore: 125 OEM bore with lip for snug fit!
Features:
*If your stock vehicles hub studs protrude past the thickness of the spacer and prevent your wheels / rims from sitting flush against the surface face of the spacers, then it is required to shorten (trim) your OEM studs. This is a common practice and most shops can do this with ease. To be sure please measure the length of your stock studs prior to purchase. This piece is meant for the front hubs of the truck only. If you intend to use them on the rear hub you will need modification to the rear hub and/or spacer for it to work. We will not accept returns if they do not work as they must be modified for the rear hubs.*
All of our Wheel Spacers and Adapters are made from the highest quality Aerospace grade 6061 – T6 aluminum. Whether you’re looking to eliminate rubbing, increase turning radius, add spacing for brake clearance, change bolt pattern to fit any wheels, or just want that flush and aggressive stance, our wheel spacers are what you are looking for! Unlike some of our competitors, we only use machined 60 degree taper bulge seat lug nuts for complete lug centric centering for your security. It is the responsibility of you, the customer, to make sure these will work prior to the purchase by making sure they are made for your vehicle. The compatibility chart is a guide to help figure out what fits, but all vehicles may not be there as there is new models being made daily! If you have any questions email us or give us a call, we are here to help you! |
© 2020 Wheel Spacers USA.
